Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended two or more people assembling this
machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the Left & Right Upright Beams (#1 & 2) by a Cross Brace (#8) in the mid-span.
Align the holes and secure each end with one 4 ¾” x 3 1/8” Bracket (#17), two M10 x 2 3/8”
Carriage Bolts (#41), ∅ ¾” Washers (#49), and M10 Aircraft Nuts (#48).
B.) Insert the Backrest Adjustment Bar (#9) through the selected holes on the Upright Beams.
C.) Insert the Left & Right Safety Catches (#12 & 13) into the selected holes on the Left &
Right Upright Beams.
DIAGRAM 1
6