Filter
Top Products
STEP 5 (See Diagram 5)
A.) Attach the Cable (#20) to the open slot on the top of the Lat Bar Frame (#7). Attach a
Pulley (#35) to the Cable. Secure the Pulley to the open slot with one M10 x 2 1/8”
Allen Bolt (#43), two Pulley Bushings (#21), and one M10 Aircraft Nut (#48).
B.) Draw the Cable around the Pulley and down to the bracket on the Sliding Weight Post
(#11). Secure the Cable to the bracket with one M10 x 1” Allen Bolt (#52), two Ø ¾”
Washers (#49), and one M10 Aircraft Nut (#48).
C.) Connect the Lat Bar (#10) to the Cable with a C-clip (#36).
DIAGRAM 5
10