Filter
Top Products
Operating the Computer
Count Up
The computer can be turned on by pressing any of the three keys or by simply
pedaling the bike. The values for Time, Dist, and Cal will start from Zero and
accumulates upward. To reset all values back to Zero, Press and Hold Down the
Enter key for two seconds.
Count Down
By pre-setting a value in the computer, the function will count down from the preset
value back to Zero. When the value reaches Zero, the alarm will go off.
For example, you want to work out for 5 minutes. Press the Enter key so the Time
starts flashing. Press Up key until 5:00 shows up. Press Enter. You can repeat the
same procedure to enter Distance and Calorie.
Note:
Please note all values on this computer are approximate and they are for
comparison purpose only. Do Not use these values for any medical or
rehabilitation purpose.
Maintenance and Storage
1. Inspect and tighten all parts each time you use the machine. Replace any
worn parts immediately.
2. The bike can be cleaned using a damp cloth and mild non-abrasive
detergent. Do not use solvents.
3. Store the machine IN-DOOR. Excess moisture and water would cause rust
on the frame.
4. The machine shall be placed at least 24 inches away from the wall or/and
any other object such as furniture to provide safe access to and passage
around the machine.
5. To avoid possible injury, the help of two or more people are needed when
moving the machine around.
13