Filter
Top Products
STEP 2 (See Diagram 2)
A.) Slide 9 Weight Plates (#37) onto the Guide Rods (#7). Make sure the grooves on the Plates
all face up and to the same direction. Insert a Selector Rod (#21) into the center hole on the
Plates. Slide the Selector Stem (#36) onto the Guide Rods.
B.) Attach the Upper Frame (#6) onto the Guide Rods (#7). Secure it with two M10 x 1” Allen
Bolts (#72) and Ø ¾” Washers (#79).
C.) Place the Upper Frame (#6) onto the Vertical Frame (#2). Secure it with two M10 x 2 3/8”
Carriage Bolts (#78), one U-shaped Bracket (#22), two ∅ ¾” Washers (#79), and two M10
Aircraft Nuts (#82).
D.) Attach the Foot Plate (#27) to the Front Base Frame (#19). Insert the Foot Plate Axle (#28)
through the holes to secure the Foot Plate.
9