Filter
Top Products
STEP 9 (See Diagram 9)
A.) Attach the Main Seat Support (#92) to the Rear Stabilizer (#93). Secure it with two M10
x 3 ½” Allen Bolts (#114), one 2 ¾” x 2” Bent Bracket (#27) and two Ø ¾” Washers
(#87).
B.) Attach the Front Post (#94) to the Main Seat Support. Secure it with two M10 x 2 ¾”
Carriage Bolts (#83), one 4 3/8” x 2 ¾” Bent Bracket (#25), two Ø ¾” Washers (#87),
and two M10 Aircraft Nuts (#89).
C.) Thread two T-shaped Lock Pins (#101) into the holes on the Main Seat Support (#92)
and the Front Post (#94).
DIAGRAM 9
20