Filter
Top Products
STEP 4 (See Diagram 4)
A.) Attach the side holes on the two Backrest Supports (#12) to the pivot on the Main Seat
Support (#4). Place the other end rest against the Backrest Adjustment Bar (#9).
B.) Attach the Backrest Board (#15) onto the Backrest Supports. Secure it with four M6 x 1 ½”
Hex Bolts (#38) and Ø ½” Washers (#43).
C.) Attach the Seat Pad (#14) to the Main Seat Support. Secure it with four M6 x 1 ¼” Hex Bolts
(#35) and Ø ½” Washers (#43).
D.) Attach the Arm Curl Pad (#16) to the Arm Curl Stand (#6). Secure it with two M8 x ¾” Allen
Bolts (#36) and Ø 5/8” Washers (#42).
DIAGRAM 4