Filter
Top Products
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended two or more people assembling this
machine to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the Left and Right Upright Beams (#45 & #1) by a Cross Brace (#2) in the Mid-
span. Secure each end of the Cross Brace with two M10 x 3 ¾” Carriage Bolts (#33), one 5
1/8” x 2 1/8” Bracket (#32), two ∅ ¾” Washers (#41), and two M10 Aircraft Nuts (#39).
B.) Insert two Crutches (#3) into the Left and Right Upright Beams. Secure each Crutch with a
Lock Knob (#30) at selected height.
C.) Place the Backrest Adjustment Bar (#9) onto the open slots on the Upright Beams to obtain
the desired Backrest incline position.
DIAGRAM 1
5