Filter
Top Products
STEP 2 (See Diagram 2)
A.) Attach the Front Post (#5) to the Main Seat Support (#4). Secure it with five M10 x ¾”
Allen Bolts (#44) and Ø ¾” Washers (#41). DO NOT tighten the Bolts yet.
B.) Attach the Main Seat Support to the Cross Brace (#2). Secure it with two M10 x 3 1/8”
Carriage Bolts (#34), one 4 ¾” x 2” Bracket (#10), two Ø ¾” Washers (#41), and two
M10 Aircraft Nuts (#39).
C.) Securely tighten all Nuts and Bolts previously installed.
D.) Insert the Arm Curl Stand (#6) into the opening on the Front Post. Use a Lock Knob
(#30) to hold the Stand in position.
DIAGRAM 2
6