Filter
Top Products
13
25. Attach the Adjustable Bench Leg (49) to the Bench
Leg (48) with the Small Adjustment Knob (81).
Insert a 45mm Square Inner Cap (26) into the top of
the Adjustable Bench Leg (49).
26. Insert three 45mm Square Inner Caps (26) into the
ends of the Leg Lever (62). Insert a 25mm Round
Inner Cap (83) into the weight tube on the Leg Lever.
Press a 25mm Angled Outer Cap (82) onto the other
end of the weight tube.
Attach the Leg Lever (62) to the Adjustable Bench
Leg (49) with an M10 x 72mm Bolt (34) and an M10
Nylon Locknut (29).
27. Insert 19mm Round Inner Caps (70) into the ends of
the three Pad Tubes (61).
Insert two Pad Tubes (61) through the holes in the
Leg Lever (62). Slide a Foam Pad (69) onto each
side of the Pad Tubes.
Insert a Pad Tube (61) through the upper tube on the
Adjustable Bench Leg (49). Slide a Foam Pad (69)
onto each side of the Pad Tube.
25
48
49
26
81
26
Weight
Tube
83
26
26
34
29
82
26
62
49
27
62
70
69
69
49
70
69
61
69
69
70
29. Make sure all parts are properly tightened before
you use the weight bench. The use of the remain-
ing parts will be explained in Adjusting the Weight
Rack, on page 14.
28. Attach the Curl Pad (54) to the Curl Upright (55) with
two M6 x 16mm Screws (50).
28
50
55
54