Filter
Top Products
9
Front Fender Install (various models)
Loosen the Front Brakes:
1. Squeeze the two Brake arms together
(A).
2. Lift out the Brake Cable Guide (B) from
the Guide Bracket (C).
C
A
A
B
B
C
Note: Turn Fork so that Brake Arms are toward front of bike.
continued >>
Assembly
Use Screw Driver and Wrench:
1. Front fender attaching hardware has
been pre-assembled onto the fork. Re-
move the Bolt (8) and Washer (9) and
Nut (10) from the fork crown.
2. Remove lower mounting Bolts (7) and
Washers (6) from the dropout before
starting (fi g 01).
g 01
7
6
8
9
10