Filter
Top Products
17
Assembly
Seat Installation
Attach Seat to Seat Post (fi g 09):
(pre-assembled on some models)
• Loosen nuts on Seat Clamp (A) and
rotate Seat (14) into riding position.
• Put the Seat Post (33) fully through
the Seat Clamp.
• Tighten the Seat Clamp so the Seat
stays on the seat post.
• If the Seat Clamp has a nut on each
side, tighten both nuts equally.
g 09
A
33
14
CAUTION: If you accidentally drop the seat post into the seat tube, it may be
diffi cult to remove it.
• Point the Seat forward and put the
Seat Post into the Seat Tube (B)
(fi gs 10, 11).
WARNING: To prevent the seat
coming loose and possible loss of
control, the “MIN-IN” (minimum inser-
tion) mark (C) on the seat post must
be below the top of the Seat Tube.
g 10
14
C
B
33
B
C
continued >>