Filter
Top Products
CAUTION: There is a right pedal marked “R” and a left pedal marked “L”.
The pedal marked “R” has right-hand threads. Tighten it in a
clockwise direction.
The pedal marked “L” has left-hand threads. Tighten it in a
counterclockwise direction.
1. Turn the right pedal marked “R” [1] into the right side of
the crank and the left pedal marked “L” [2] into the left
side of the crank.
2. Tighten the pedals:
- Make sure the threads of each pedal are fully into the
crank
- The recommended torque (tightness) for each pedal is
23 ft.-lbs.
Pedals