Filter
Top Products
Front Reflector Bracket Installation
Bottom of Fork
Top of Fork
Handlebar Mount
Style 1
Handlebar Mount
Style 2
This section covers several different placements of the front reflector bracket. Make sure the front
reflector is vertical (perpendicular to the ground).
The front reflector bracket will mount on the fork or handlebar. Some models may already have the
brackets and reflectors installed. If the reflector is not installed, refer to the “Front Reflector Bracket
and Clear Reflector Assembly” section.
Determine which type of reflector bracket you have and its mounting location and then follow the
instructions for that style.
Top of Fork
1. Attach the hardware to the fork:
- Remove and discard plastic cap [5] (if installed) on fork [6]
- Tighten bearing cone [7] by hand to make sure the bearings are tight
- Install reflector bracket and locknut [8]
- Tighten locknut.