Filter
Top Products
PROGRAMMING
DISPLAY
SELECT
Used to view alternate information such as
Speed, Pulse, Laps, Elevation, and Calories dur-
ing your workout. Note: The console will auto-
matically default back to show Time/Distance.
ARE THE SOUNDS MY TREADMILL MAKES NORMAL?
All treadmills make a certain type of thumping noise due to the belt riding over the rollers, espe-
cially new treadmills. This noise will diminish over time, although may not totally go away. Over time,
the belt will stretch, causing the belt to ride smoother over the rollers.
WHY IS THE TREADMILL I HAD DELIVERED LOUDER THAN THE ONE AT THE
STORE?
All fitness products seem quieter in a large store showroom because there is generally more back-
ground noise than in your home. Also, there will be less reverberation on a carpeted concrete floor
than on a wood overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through
the floor. If a fitness product is placed close to a wall, there will be more reflected noise.
WHEN SHOULD I BE WORRIED ABOUT A NOISE?
As long as the sounds your treadmill makes are no louder that a normal conversational tone of voice,
it is considered normal noise. If your treadmill is louder than this, you may want to call the Horizon
Fitness Customer Service Center @ 1.888.993.3199. Sometimes an initial diagnosis can be made
over the phone.
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our treadmill so lubrication is not needed. The most important
maintenance step is to simply wipe your perspiration off the treadmill after each use.
HOW DO I CLEAN MY HORIZON FITNESS TREADMILL?
Clean with soap and water only. Never use solvents on plastic parts.
HOW OFTEN DOES MY HORIZON FITNESS TREADMILL NEED
TO BE LUBRICATED?
Our testing has shown that under normal use, your treadmill will work properly without a breakdown
in the lubrication system for years. However, to keep your treadmill runnining without problems, we
recommend that lubrication be added once a year. Please use the lubrication provided by Horizon
Fitness only.
COMMON PRODUCT QUESTIONS
MAINTENANCE
11 ELITE 2.0T 30 ELITE SERIES
FINISHING A WORKOUT
When your workout is finished, the treadmill con-
sole will beep and ‘END’ will be flashing in the
Time window. Your workout information will stay
displayed on the console for 30 seconds before it
will reset.
CHOOSING THE TIME
Choose Time by pressing the
+
or - speed buttons or use the default time. Once the desired time is
selected, press the START button.
CHOOSING THE TIME
Choose Time by pressing the
+
or - speed buttons
or use the default time. Once the desired time is
selected, press the START button.
CHOOSING THE LEVEL
Choose the program difficulty level, level 1-10, by pressing the + or - speed buttons. Available only
on certain programs. You may also choose your program level by pressing the numbered quick speed
key that correlates with the program level number. For example, to choose a program level of 5, sim-
ply press quick speed key number 5. Once the program level has been chosen, press the ‘select’ but-
ton. Once in a program, the user may change the difficulty level by pressing the + or - speed keys
or by pressing the quick speed keys. NOTE: If one segment is changed, the entire program will in
turn be changed. For example, when in a program, if the user increases the speed 1 mph, all of the
remaining segments will also be increased by 1 mph.
elite treadmill owner’s guidev1.1.qxd 10/13/2003 11:40 AM Page 12