Filter
Top Products
10
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
11
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
BOLT (D)
FLAT WASHER (E)
CONSOLE MAST
CONSOLE CABLES
CONSOLE
ASSEMBLE
LEFT SIDE
FIRST
* NOTE: Be
careful not to
pinch any
wires while
attaching the
console.
ASS EM BLY STE P 3
Disengage the deck LOCK LATCH with your foot to lower the RUNNING DECK.
Open HARDWARE BAG 3.
Gently place the CONSOLE on top of the CONSOLE MASTS. Attach the LEFT SIDE first using 1 BOLT
(D) and 1 FLAT WASHER (E).
Connect the CONSOLE CABLES, carefully tucking wires in masts to avoid damage.
Attach the RIGHT SIDE of the CONSOLE using 1 BOLT (D) and 1 FLAT WASHER (E).
A
B
C
D
E
BOLT (D)
25 mm
Qty: 2
FLAT WASHER (E)
16 mm
Qty: 2
HARDWARE BAG 3 CONTENTS :
SCREWS (F)
BOTTOM CONSOLE COVER
CONSOLE MAST
CONSOLE
ASS EM BLY STE P 4
Open HARDWARE BAG 4.
Slide right BOTTOM CONSOLE COVER up CONSOLE MAST and align screw holes. Attach BOTTOM
CONSOLE COVER to CONSOLE using 3 SCREWS (F).
Repeat on other side.
Before the first use, lubricate the treadmill deck by following the instructions in the Maintenance
section.
A
B
C
D
SCREW (F)
15 mm
Qty: 6
HARDWARE BAG 4 CONTENTS :
YO U’ RE FI NI SH ED !
T701_Rev.1.2.indd 10-11 9/17/08 4:55:52 PM