Horizon Fitness T20 Treadmill User Manual


 
CHOOSING THE TIME
Press SELECT and use the
+
or - buttons to set Time. Once the desired Time is selected, press the
START button. Select your desired speed using the + or - (speed) buttons.
FINISHING A WORKOUT
When your workout is finished, the treadmill console will beep
twice and ‘END’ will be displayed in the Time window. Your
workout information will stay displayed on the console for 15
seconds before it will reset.
PROGRAMMING
DISPLAY
SELECT
Used to view alternate information such as
Speed, Pulse, Laps, Elevation, and Calories dur-
ing your workout. Note: The console will auto-
matically default back to show Time/Distance.
TIME
Shown as Minutes:Seconds. View the time remaining
or the time elapsed in your workout.
ARE THE SOUNDS MY TREADMILL MAKES NORMAL?
All treadmills make a certain type of thumping noise due to the belt riding over the rollers, especial-
ly new treadmills. This noise will diminish over time, although may not totally go away. Over time, the
belt will stretch, causing the belt to ride smoother over the rollers.
WHY IS THE TREADMILL I HAD DELIVERED LOUDER THAN THE ONE AT THE
STORE?
All fitness products seem quieter in a large store showroom because there is generally more back-
ground noise than in your home. Also, there will be less reverberation on a carpeted concrete floor
than on a wood overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through
the floor. If a fitness product is placed close to a wall, there will be more reflected noise.
WHEN SHOULD I BE WORRIED ABOUT A NOISE?
As long as the sounds your treadmill makes are no louder that a normal conversational tone of voice,
it is considered normal noise. If your treadmill is louder than this, you may want to call the Horizon
Fitness Customer Service Center @ 1.888.993.3199. Sometimes an initial diagnosis can be made
over the phone.
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our treadmill so lubrication is not needed. The most important
maintenance step is to simply wipe your perspiration off the treadmill after each use.
HOW DO I CLEAN MY TREADMILL?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
COMMON PRODUCT QUESTIONS
MAINTENANCE
11 HORIZON T20 30 HORIZON SERIES
horizon T20_30_40 owner’s guidev1.2.qxd 10/13/2003 1:06 PM Page 12