Filter
Top Products
BEFORE
YOU BEGIN
12
INTRODUCTION
IMPORTANT
PRECAUTIONS
ASSEMBLY
BEFORE
YOU BEGIN
ELLIPTICAL
OPERATION
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
A S S E M B LY S T E P 5
GUIDE RAIL
TEFLON WASHERS (E)
NUT (G)
BOLT (D)
LOWER LINK ARM
SPACER (F)
LOWER LINK ARM
SPACER
TEFLON WASHERS
LOWER
HANDLEBAR
A) Open HARDWARE BAG FOR STEP 5.
B) Slide SPACER (F) into LOWER HANDLEBAR.
C) Place TEFLON WASHERS (E) on either side of SPACER (F). While holding TEFLON WASHERS (E) slide LOWER
LINK ARM into bottom end of LOWER HANDLEBAR.
D) Insert BOLT (D) into LOWER HANDLEBAR and secure using NUT (G).
E) Repeat on other side.
NYLON NUT (G)
INSIDE DIAMETER:
8 mm
Qty: 2
BOLT (D)
60 mm
Qty: 2
SPACER (F)
44 mm axis
Qty: 2
TEFLON WASHER (E)
24 mm
Qty: 4
HARDWARE BAG FOR STEP 5 CONTENTS :