Filter
Top Products
22
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our bikes so lubrication is not needed. The most important main-
tenance step is to simply wipe your perspiration off the bike after each use.
HOW DO I CLEAN MY HORIZON FITNESS RECUMBENT BIKE?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness of your Horizon Fitness recumbent bike and its operating environment will keep mainte-
nance problems and service calls to a minimum. For this reason, Horizon Fitness recommends that
the following preventive maintenance schedule be followed.
AFTER EACH USE (DAILY)
• Unplug the power cord from the wall outlet.
WARNING!
To remove power from the recumbent bike, the power cord must be disconnected from the wall out-
let.
• Never use solvents, as they can cause damage to the recumbent bike.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the recumbent bike or in any other area where it can
become pinched or cut.
EVERY WEEK
Clean underneath the recumbent bike, following these steps:
• Unplug the power cord at the wall outlet.
• Move the recumbent bike to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
recumbent bike.
• Return the recumbent bike to its previous position.
EVERY MONTH
• Inspect all assembly bolts and pedals on the machine for proper tightness.
W ARNING
Maintenance & Troubleshooting Procedures