Filter
Top Products
18
USING YOUR THR ZONE 1 & 2 PROGRAMS
The THR zone program is designed to keep the user at an optimum exercise level, while adjusting the
resistance levels to keep the user at a target heart rate. To choose the THR zone program, follow these
instructions.
1. Choose the THR zone program by pressing the ‘Up’ or ‘Down’ buttons. Press ‘Enter’.
2. Determine your target THR zone by using the heart rate chart (reference target heart rate THR zone
chart in table of contents). Choose your target pulse zone by pressing the ‘Up’ or ‘Down’ buttons. Your
target THR zone should be set at a number that you will be able to exercise throughout the majority of
your workout.
3. The THR zone program will have a 5 minute warm-up period before it will start adjusting the resist-
ance levels to get you to your target pulse zone.
4. After the 5 minute warm-up period, the resistance levels will increase gradually to get the user to
the selected target THR zone. Once the user is at the target pulse zone; plus or minus 5 beats, the
resistance level will remain at the current resistance level.
5. If the actual heart rate of the user is above the target THR zone, the resistance levels will gradually
begin decreasing to keep the user in the target pulse zone. If the user is more than 25 beats above the
target THR zone, the console will shut down for safety purposes.
6. The last 5 minutes of the program will be dedicated to a cool-down period. At this time, the program
will gradually decrease the resistance level to give the user a smooth and easy cool down.
Note: The chest strap is required to use the Target THR zone Program
CHEST STRAP TRANSMITTER PLACEMENT AND MOISTENING THE ELECTRODES
Apply Moisture Here
Backside of Chest Transmitter
Logo