Heath Zenith 9600LED series Camping Equipment User Manual


  Open as PDF
of 24
 
5
598-1338-03
TESTING AND ADJUSTMENTS
1. Turn on the circuit breaker and light switch.
Note:Sensorhasa1
1
/
2
minute warm up period
beforeitwilldetectmotion.Whenrstturnedon
wait1
1
/
2
minutes.
2. Set:
ON-TIMEswitchtoTEST
SENSITIVITYdialtoMidway
3.
Walkthroughthecoverageareanotingwhereyou
arewhenthelightsturnon.InTESTmode,light
willstayonfor5secondsaftersensingmotionand
thenturnoff.
4. AdjusttheSENSITIVITYtoincreaseordecrease
therangeasneeded.Toomuchsensitivitymay
causefalsetriggeringduetoheatsourcesinthe
coveragearea(seeAdjustment of Coverage Area
or Troubleshootingsection).
5. SettheamountofON-TIMEyouwantthelightto
stayonaftermotionisdetected(5or10minutes)
or...
SettheON-TIMEtotheDUSK-to-DAWNsetting
ifyouwantthelighttostayonallnight,every
night.Thephotocellwillturnthelightoffduring
theday.
Maximum Range Maximum
Coverage Angle*
(Top View)
TEST 5
10
DUSK
MINUTES TODAWN
– +
SEN
30ft.
(9.1m)
6ft.
(1.8m)
180°
Photocell
Least Sensitive Most Sensitive
The sensor is less sensitive to motion directly
towards it and more sensitive to motion across
coveragearea.
Sensor
Motion Motion
 previous next