Heath Zenith 9600LED series Camping Equipment User Manual


  Open as PDF
of 24
 
Dated receipt required for warranty replacement.
FEATURES
• Automaticallycomesonwhenmotionisdetected.
• Automaticallyturnslightoff.
• Photocell keeps the light off during daylight
hours.
REQUIREMENTS
• Thelightcontrolrequires120voltsAC.
• If you want touse Manual Override mode, the
controlmustbewiredthroughaswitch.
NOTICE:Nottobeusedonlightdimmerortimer-
controlledcircuits.
• Some electrical codes require installation by a
qualified electrician.
• This light xture has been tested/certied us-
ing Lights of America LED Lamp Model No.
2025LEDE12.
UNPACKING
Besuretoremoveallcontentsfrompackagingand
verifyallitemsarepresentbeforeassemblingthislight
xture.Thispackageincludesthefollowingitems:
• Lantern
• ThreeLEDLamps
(LightsofAmericaModel:2025LEDE12)
• Universalmountingbracket(X-Bar)
• Mountinghardware
• Wirenuts
• Owner’sManual
©2008 598-1338-03
Motion Sensing
Diecast Metal Lantern
Model: 9600LED Series
INSTALLATION
Forbestperformance,mountthextureabout6feet
(1.8m)abovetheground.
1. Removetwodecorativenuts.
2. RemoveX-Bar.
3. TightenmountingscrewsonX-Barngertight.
4. AttachX-Bartojunctionbox.
JunctionBox
X-Bar
DecorativeNut
LanternBase
LanternMounting
Screw
X-Bar
BracketMounting
Screw
Note:Werecommendhavinganassistanthelphold
thelanternassemblyduringthewiringprocess.
next