Filter
Top Products
23
THE INFORMATION MODE/DEMO MODE
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also al-
lows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The Time/Segment Time/
Pace display will show the
total number of hours the
treadmill has been used.
The Distance/Incline/Laps
display will show the total
number of miles (or kilome-
ters) that the walking belt
has moved.
An “E” for english miles or an
“M” for metric kilometers will
appear in the Speed display.
Press the Speed
▲▲
button to
change the unit of measure-
ment.
IMPORTANT: The Pulse/
Calories/Fat Calories dis-
play should be blank. If a
“d” appears in the display, the
console is in the “demo”
mode. This mode is intended
to be used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the displays and indicators on the console
will automatically light in a preset sequence, although
the buttons on the console will not operate. If a “d” ap-
pears in the Pulse/Calories/Fat Calories display
when the information mode is selected, press the
Speed
▼▼
button so the display is blank.
To exit the information mode, remove the key from the
console.