Filter
Top Products
21
HOW TO OPERATE THE PERSONAL TELEVISION
IMPORTANT: Before operating the television, you
must connect a 75 ohm CATV cable to the 75 ohm
terminal on the elliptical exerciser or a VCR or DVD
player to the audio/video input jack. See page 12
for instructions.
Follow the steps below to operate the television.
1. Begin pedaling or press any button on the con-
sole to turn on the console.
When you turn on the console, the console mode
will be automatically selected and the word
CONSOLE will appear on the screen.
2. Press the TV button to turn on the television.
To turn on the television, press the TV button
once. The word TUNER will appear on the screen.
3. Press the Channel buttons to select the
desired cable channel.
Note: Complete this step only if you are using ana-
log cable. Otherwise, change channels through an
external source such as your cable box or your
VCR.
When you turn on the television, the screen will
show the last cable channel that was selected. To
select a different channel, press the Channel but-
tons. The selected cable channel number will
appear on the screen for a few seconds. Note:
The television is equipped with a channel memo-
rizing function that allows you to go directly from
the current channel to the next channel saved in
memory. Before channels can be selected in this
way, they must be saved in the television’s memo-
ry. See HOW TO USE THE INFORMATION
MODE on page 22.
4. Press the Volume buttons to adjust the vol-
ume.
When you press either Volume button, the volume
level indicator will appear on the screen for a few
seconds.
To use earphones or headphones (not included),
plug them into the headphone jack on the console.
5. When you are finished using the television,
press the TV button.
To turn off the television, press the TV button
repeatedly until the word CONSOLE appears on
the screen.
HOW TO OPERATE A DVD PLAYER OR VCR
IMPORTANT: Before operating a DVD player or
VCR, you must connect a CATV cable or an RCA
component video cable to the console. See page
12 for instructions.
1. Begin pedaling or press any button on the con-
sole to turn on the console.
When you turn on the console, the console mode
will be automatically selected and the word
CONSOLE will appear on the screen.
2. Select the appropriate viewing mode.
To operate a DVD player or VCR connected with a
CATV cable, press the TV button repeatedly until
the word TUNER appears on the screen.
To operate a DVD player or VCR connected with a
component video cable, press the TV button
repeatedly until the word AV1 appears on the
screen. Then, press the play button on your DVD
player or VCR.
3. Press the Volume buttons to adjust the
volume.
When you press either Volume button, the volume
level indicator will appear on the screen for a few
seconds.
To use earphones or headphones (not included),
plug them into the headphone jack on the console.
4. When you are finished using the television,
press the TV button.
To turn off the television, press the TV button
repeatedly until the word CONSOLE appears on
the screen.