Grizzly G0695 Treadmill User Manual


  Open as PDF
of 60
 


Setting Spindle
Speed

   



        
        

Calculating Spindle Speed
1. Figure 29
      

Cutting Speeds for High Speed Steel (HSS)
Cutting Tools
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Note: For carbide cutting tools, double the cutting
speed. These values are a guideline only. Refer to
the MACHINERY'S HANDBOOK for more detailed
information.
Figure 29.

3.       


Setting Spindle Speed
1. 
      

Note: This precaution avoids unexpected
high speed startup of the spindle.
2.   
ON


Figure 30
Figure 30.







2. 

Failure to follow spindle speed and feed rate
guidelines may threaten operator safety
from ejected parts or ejected tools.
Remember:Milling with the quill fully extended
can cause tool chatter. For maximum spindle
rigidity, keep the spindle retracted into the head-
stock as far as possible with the quill lock lever
locked and the downfeed selector tightened.
 previous next