Filter
Top Products
Figure 26
Figure 26.
Tools Needed Qty
To rotate the turret:
1.
Figure 27.
3.
Always lock the turret firmly in place after
adjusting the rotation. Unexpected move-
ment of the head during operations could
cause the cutter to bind with the workpiece
causing damage to the cutter and workpiece,
and possible personal injury.
2.
Figure 27
4.
Note: Swiveling the hex bolt head allows
the flats of the bolt head to re-align with the
T-slot.
NOTICE
Do not rotate the headstock past 50 right
or 50 left. If you do, you run the risk of
binding a turret bolt and the headstock
could jam.
Headstock Turret
Rotation