Filter
Top Products
760000-INS-LAB-RevA08 9
Service indicator: Mechanical failure, service required;
contact your Graham-eld equipment provider.
InstallatIon
unpaCkIng
1. Before unpacking, check for obvious damage to the car-
ton or its contents. If damage is evident, please notify
the carrier and your Graham-Field equipment provider.
2. Remove all loose packing from the carton.
3. Carefully remove all components from the carton.
4. Inspect all components. If damage is evident, please
notify the carrier and your Graham-Field equipment
provider.
pump and mattress InstallatIon
1. Remove all sheets, blankets, and pillows from the bed.
2. Place the mattress on top of the
bed frame; ensure that the foot
end symbol faces up at foot end
as shown at right. Secure mat-
tress to bed with straps.
3. Fold open the wire hangers on
the back of the pump as shown
at right.
4. Either hang the pump on the
bed's foot end, as shown at right,
or place the pump on a at sur-
face easily accessible to the care-
giver and/or doctor.
hanger