Filter
Top Products
3. Behind the seat, push both shoulder straps
under the owners manual pocket and out the
other side
Ì
. Reassemble the strap ends onto
the metal junction plate. The strap on your left
must go on first, then the strap on your right.
Check that the straps are completely within the
junction plate loop, as shown
Í
, otherwise the
straps could slip out.
4. Inspect the harness straps from the front and
back of the safety seat to be sure they are not
twisted. Twisted belts can create slack in the
harness straps and reduce the protection
provided by the safety seat.
5. Pull on the harness straps from the front of
the safety seat to be sure the straps are secure.
35
Í
Ì