Filter
Top Products
6
2. Tip: Be careful not to pinch the wires during
this step.
H
ave a second person hold the Upright (1) near
the Base (5). Connect the Upper Wire (47) to
t
he Lower Wire (46).
Attach the Upright (1) to the Base (5) with five
M8 x 16mm Allen Bolts (39), five SW8 Split
Washers (34), and five M8 Flat Washers (33).
2
46
47
1
39
3
4
33
3
9
39
39
34
34
34
33
3
3
33
39
34
33
5
Avoid pinching
the wires during
this step
3. Attach the Right Handlebar (9) to the Upright (1)
with four M8 x 16mm Allen Bolts (39), four SW8
Split Washers (34), and four M8 Flat Washers
(33).
Attach the Left Handlebar (10) in the same
way.
3
33
9
1
34
33
34
39
39
10
4. Make sure that all parts are properly tight-
ened before you use the vibration platform.