Filter
Top Products
3. Fit
NOTE: Correct fit is an essential element of bicycling safety, performance and comfort. Making the adjustments to your bicycle which result
in correct fit for your body and riding conditions requires experience, skill and special tools. Always have your dealer make the adjustments
on your bicycle; or, if you have the experience, skill and tools, have your dealer check your work before riding.
The following instructions are for standard bike design, refer to the Revive Section at the front of this manual for specific Revive instructions.
Make sure the bike fits. A bike that’s too big or too small is harder to control and can be uncomfortable.
WARNING: If your bicycle does not fit properly, you may lose control and fall.
With a Revive breakthrough adjustability you can custom fit the bike to you, check the Revive section at the front of this manual for instructions
on how to adjust the revive to fit your body, if in any doubt consult an approved Giant Dealer for assistance.
A. Standover height:
Note: Revive has a very low step in, thus the standover height is suitable for all riders between the heights 5’0”– 6’5”
B. Saddle position
Correct saddle adjustment is an important factor in getting the most performance and comfort from your bicycle. If the saddle position is not
comfortable for you, see your dealer, who has the tools and skill to change it.
The saddle can be adjusted in three directions:
1. Up and down adjustment.
· sit on the saddle;.
18