Fostex VF160EX Cyclometer User Manual


 
80
If you press the [DIRECT REC TRK] key to activate
the internal mixdown mode when the recording
track(s) or source track(s) are set for “DIRECT re-
cording” or “BUSS recording”, the following mes-
sage (“Rec Mode Change!” and “Sure?”) appears.
In this case, pressing the [ENTER/YES] key activates
the internal mixdown mode.
Pressing the [EXIT/NO] key cancels the operation.
<Hint>
After the internal mixdown recording is completed,
the unit automatically quits the internal mixdown
mode.
The unit also automatically quits the internal
mixdown mode when you complete performing
any of the following while the internal mixdown
mode is active. Therefore, if you want to continue
the internal mixdown mode, you need to activate
the mode again.
• Program change
• Program delete
• Creating a new program
• Formatting a disk
• Copy/paste, Move/paste
• Erase
• Save to/load from DAT/adat
<Note>
Activating the internal mixdown mode
2. When the unit is stopped, press the [DIRECT REC TRK]
key while holding down the [SHIFT] key.
See the illustration below.
1. Select the program to be mixed down.
To select the desired program, press the [PGM SEL] key
and select the program using the [JOG] dial, then press
the [ENTER/YES] key.
The program number/name shown on the Normal dis-
play changes to “Int. Mixdown” in inverse video, showing
that the internal mixdown mode is now active, while the
[DIRECT REC TRK] key flashes.
In the example shown below, “P08: Song Data-1” is mixed
down.
Each time you press the [DIRECT REC TRK] key while hold-
ing down the [SHIFT] key, the mixdown mode alternates
on and off.
Normal display
Internal mixdown mode display
If “
Rec Protect
” in the Setup mode is set to “
ON
”,
you cannot carry out internal mixdown.
If you try to perform the internal mixdown opera-
tion, “
Protected!
” appears on the display.
In this case, set “
Rec Protect
” in the Setup mode to
OFF
” before performing the internal mixdown
operation.
<Note>
INPUT SEL SOURCE
REC ASSIGN
BUSS
DIRECT
REC TRK REC TRK
AUTO RTN
AUTO PUNCH
START IN
OUT
END
IN ALIGN SEL OUT
DISP SEL
PGM SEL
SETUP
INT
MIXDOWN
A RTN
A PLAY
SCENE SEQ.
TIME BASE
CLIPBOARD
MARK
1
2
3
4
5
6
7
HOLD/ STORE EDIT
UNDO
/REDO
VARI
PITCH LOCATE SCRUB
P.EDIT EVT MEM
F FWDREWINDPLAYSTOPRECORD
CLIPBOARD PLAY
LOCATE ABS 0
LOCATE REC END
PREV
NEXT
JOG
SHUTTLE
AUTO
PUNCH
EXIT/NO
EJECT
ENTER/YES
FADER
ADJUST
LEVEL
ADJUST
SHIFT
CD PLAY
[DIRECT REC TRK] key
[SHIFT] key