Filter
Top Products
EVO2 MOTORIZED TREADMILL
Visit us at: www.evofitness.com
22
COMPUTER OPERATION
GOAL COURSE CALORIES
When the computer is in POWER ON status press the GOAL COURSE CALORIES button on the console. The LED GOAL
COURSE CALORIES button lights up. If no buttons are pressed within 3 minutes the program will return to POWER ON
status. If you wish to return to POWER ON status, press the STOP button any time.
The CALORIES LED will light up and show the preset calories burned as 050 and blinking. After press the GOAL COURSE
CALORIES button. Press the INCLINE UP/DOWN buttons to set up the desired calories then press the START button to
start. After pressing the START button the CALORIES count down from the preset calories. The other information counts up
until the treadmill stops. The Speed starts from 2MPH/3.2KMPH and the incline starts from level 0. Press the SPEED
UP/DOWN buttons to adjust the speed. Press the INCLINE UP/DOWN buttons to adjust the incline level.
During exercise press STOP to pause the program. The Speed and Incline Level return to the beginning levels while the
other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the
STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons
are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.
20 MINUTE FAST RUN
When the computer is in POWER ON status press the 20 MINUTE FAST RUN button on the console then press START to
start the program. If no buttons are pressed within 3 minutes the program will return to POWER ON status. At this time the
LED 20 MINUTE FAST RUN button will light up. The Time counts down from 20:00. The other information will count up until
the treadmill stops. The SPEED and INCLINE level follow the preset program.
During exercise press STOP to pause the program. The Speed and Incline Level will return to the beginning levels while the
other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the
STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons
are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.
During the exercise changes in both SPEED and INCLINE follow the preset program. You can still press the SPEED
UP/DOWN and INCLINE UP/DOWN to change the program. Any change only effects the current workout period. The
computer does not record any changes for future use on this program.
40 MINUTE JOG
When the computer is in POWER ON status press the 40 MINUTE JOG button on the console then press the START button
to start the program. If no buttons are pressed within 3 minutes the program will return to POWER ON status. At this time the
LED 40 MINUTE JOG button will light up. The TIME counts down from 40:00, and the other information will count up until the
treadmill stops. The SPEED and INCLINE levels follow the preset program.
During exercise press the STOP to pause the program. Speed and Incline Level return to the beginning levels while the other
information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the STOP
button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons are
pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.
During the exercise changes in both SPEED and INCLINE follow the preset program. You can still press the SPEED
UP/DOWN and INCLINE UP/DOWN to change the program. Any change only effects the current workout period. The
computer does not record any changes for future use on this program.