Filter
Top Products
EVO2 MOTORIZED TREADMILL
Visit us at: www.evofitness.com
21
COMPUTER OPERATION
QUICK START
In POWER ON status, press the START button to QUICK START. The Speed starts from 0.5MPH/0.8KMPH and the Incline
Level starts from 0. Press the SPEED UP/DOWN buttons to change the Speed. Press the INCLINE UP/DOWN buttons to
change the incline level.
During the exercise press STOP to pause the program. The Speed and Incline Level return to the beginning levels while the
other information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the
STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons
are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.
GOAL COURSE TIME
When the computer is in POWER ON status press the GOAL COURSE TIME button on the console. The LED GOAL
COURSE TIME button will light up. If no buttons are pressed after this within 3 minutes the program will return to POWER
ON status. If you wish to return to POWER ON status, press the STOP button any time.
The TIME LED will light up, show the preset time as 15:00 and blink. After press the GOAL COURSE TIME button. Press
the INCLINE UP/DOWN buttons to set your ideal workout time then press the START button to start. After pressing the
START button the TIME counts down from the preset time. The other information counts up until the treadmill stops. The
Speed starts from 2MPH/3.2KMPH and the incline starts from level 0. Press the SPEED UP/DOWN buttons to adjust the
speed. Press the INCLINE UP/DOWN buttons to adjust the incline level.
During exercise press STOP to pause the program. Speed and Incline Level return to the beginning levels while the other
information (Time, Distance, Calories) is paused. To recall values and resume exercising press START. Pressing the STOP
button again within 30 seconds returns all data to zero and the computer returns to POWER ON status. If no buttons are
pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to zero.
GOAL COURSE DISTANCE
When the computer is in POWER ON status press the GOAL COURSE DISTANCE button on the console. The LED GOAL
COURSE DISTANCE button lights up. If no buttons are pressed within 3 minutes the program will return to POWER ON
status. If you wish to return to POWER ON status, press the STOP button any time.
The DISTANCE LED will light up, show the preset distance as 3MI/5KM and begin blinking. After press the GOAL COURSE
DISTANCE button. Press the INCLINE UP/DOWN buttons to set up the ideal distance then press the START button to start.
After pressing the START button the DISTANCE counts down from the preset distance. The other information counts up
until the treadmill stops. The Speed starts from 2MPH/3.2KMPH and incline starts from level 0. Press the SPEED
UP/DOWN buttons to adjust the speed. Press the INCLINE UP/DOWN buttons to adjust the incline level.
During exercise press STOP to pause the program. Speed and Incline Level return to the beginning levels while the other
information (Time, Distance, Calories) is paused. To recall values and resume exercising press START.
Pressing the STOP button again within 30 seconds returns all data to zero and the computer returns to POWER ON status.
If no buttons are pressed within 30 seconds the computer automatically returns to POWER ON status and all data returns to
zero.