Filter
Top Products
SETTING THE CLOCK
7
E1100 OPERATION MANUAL
6
The clock displays time in 12-hour format.With the radio turned on
or off,press TIME SET for two seconds.Within three seconds press the
HOUR and MINUTE buttons to set the correct hour and minutes.They
can be pressed with quick, short presses to advance slowly or they
can be kept pressed down to advance rapidly.When finished, release
theTIME SET button or wait until the digits stop flashing.
Select the BUZZER or RADIO setting on the right side of the radio.
With the radio turned on or off,press AL.SET for two seconds.Within
three seconds press the HOUR and MINUTE buttons to set the correct
hour and minutes.They can be pressed with quick, short presses to
advance slowly or they can be kept pressed down to advance rapidly.
When finished, release theAL.SET button or wait until the digits stop
flashing.
With the radio turned on or off,press the AL. ON/OFF button.The
alarm activation symbol appears in the upper right corner of the LCD
and looks like a loudspeaker.Turn it off by pressing the AL. ON/OFF
button again and the symbol disappears.
When the activated alarm turns the buzzer or the radio on, it can be
turned off by pressing theAL. ON/OFF button.This will cause the
loudspeaker symbol to disappear from the display.
A quick press of the LIGHT button causes the display to be illuminat-
ed for about 5 seconds. Use a long press to permanently light the dis-
play (note that this causes increased battery usage). Press
LIGHT/SNOOZE again to turn it off.
While the alarm is on, pressing the SNOOZE button causes the alarm
to pause for about 10 minutes, and then continue.This can be repeat-
ed three times.
With the radio turned off,press this button for two seconds to lock it;
‘Hold’ appears in the display. Press the button again to unlock it; ‘Un-
H’ appears in the display.
To minimize the possibility of battery acid leakage, only use high
quality alkaline, lithium or rechargeable nickel-metal-hydride batteries.
Never intermix old with new, or different brands or types of batteries.
Damage caused by battery acid leakage is not covered by this prod-
uct’s warranty.
SWITCHING THE ALARM ON/OFF
SETTING THE ALARM
LIGHT/SNOOZE
IMPORTANT BATTERY INFORMATION
LOCK BUTTON