CycleOps 100 PRO Exercise Bike User Manual


 
8
CHAPTER 5: Common AdJUsTmEnTs
Replace Speed Sensor Battery (200 Pro only)
Over time, the lithium battery in the speed sensor will need to be changed. See Preventative Maintenance for when to replace.
1. Using a 4mm Allen wrench, remove the
three chain guard bolts and remove the
chain guard.
3. Replace the battery with a compatible
CR2032.
Replace Cadence Sensor Battery (200 Pro only)
Over time, the lithium battery in the cadence sensor will need to be changed. See Preventative Maintenance for when to replace.
2. Locate speed sensor next to hub.
5. Using a 4mm Allen wrench, and three
chain guard bolts, reattach the chain
guard.
4. Using the new battery, remove the bat-
tery cover on the back of the sensor by
turning counterclockwise approximately
one half turn.
2. Locate the cadence sensor inside main
frame.
1. Using a 4mm Allen wrench, remove the
three chain guard bolts and remove the
chain guard.
3. Using 4mm Allen wrench, remove the
bolt attaching the cadence sensor (be
sure to hold the cadence sensor arm to
avoid dropping the cadence sensor in
the main frame). Slide cadence sensor
out of the main frame.