CycleOps 100 PRO Exercise Bike User Manual


 
5
1. If necessary, the four outer leveler
feet can be adjusted. Turn stabilizer feet
clockwise to lower the indoor cycle. Turn
stabilizer feet counterclockwise to raise
indoor cycle.
Leveler Feet
Level the Indoor Cycle
Move the indoor cycle to where it will be used and level it by rotating the adjustable feet underneath the stabilizers. Leveling
the indoor cycle helps ensure a stable and quiet ride and reduces wear on the frame. When adjusted properly, there is no rocking
movement from one foot to the other.
Lock Nut
A
B
Rear stabilizer
Front stabilizer
2. Secure the leveler feet by tightening
the lock nuts, with the multi-purpose
wrench, flush against the bottom of the
rear and/or front stabilizer.
5. Loosen the 6mm bolt and place seat rails
within the clamp. Adjust to desired seat
placement using 6mm Allen wrench.
6. Secure the plastic end cap to the seat
post using two end cap screws with the
Phillips screwdriver side of the 6mm Allen
wrench.
Seat post
clamp
F
Seat
G
4. Attach seat to seat post clamp.
Seat post
clamp
F
Seat
G
End cap
K
E
Seat post
A
B
Rear stabilizer
Front stabilizer