Filter
Top Products
26 27
Reception status
Signal reception failed
Radio wave reception environment was very
good
Radio wave reception environment was good
Radio wave reception environment was not very
good
Reception
level
NO
H
M
L
* The time display may shift slightly depending on the reception environment and
internal watch processing even if radio waves are properly received.
* H, M and L indicate the reception status and are not connected to the performance of
the watch.
• If NO is indicated, find a location or direction where the reception is better and
perform on demand reception again. (p. 20)
WW
7. Confirming Reception Status
• The result of the radio wave reception can be confirmed.
• The daylight saving time setting status of the home city can be confirmed.
1. Pull the crown out to position 1 and set the mode to TME, CAL or RX-S.
2. Press the crown back into its normal position and press the lower right button (A)
once to confirm the reception status. The second hand will move to H, M, L or NO.
• The daylight saving time setting status for the home time is displayed on digital
display 2 (flashes alternately between SMT and ON or OFF).
• The radio wave reception indicator points to
JPN, EUR, USA or CHN.
3. Press the lower right button (A) once.
• The watch returns to the normal time display
(1-second interval movement).
• It also returns automatically to normal
display if there are no operations for 10
seconds.
[Digital display 2]