Filter
Top Products
Changing Modes
The mode changes each time the ࠗ
M button is
pressed. The current mode during operation can
be confirmed with the mode hand [4].
The modes change in the following sequence:
[TME] ➡ [CAL] ➡ [AL-1] ➡ [AL-2] ➡ [AL-3] ➡
[CHR] ➡ [TMR] ➡ [SET]
The Time Difference Between the Cities Indicated
by this Watch and Greenwich Mean Time
Using the Zone Setting Function
This page should be read with the watch diagram, on
the first page of this manual, showing the location of
the parts.
This watch can display the time in 30 cities of the
world in sequence. Using the zone setting
function allows you to skip the cities you do not
wish displayed.
[ Preparation for zone setting ]
Press the ࠗ
M (MODE) button to move the mode
hand to [SET]. (At this point, the cities to be
displayed or to be skipped can be confirmed by
using either the ࠗ
A [UP] or ࠗC [DOWN] button.)
[ Zone setting – Display/No Display]
1. Pull the ࠗ
M (MODE) button out to the setting position.
2. Use the ࠗ
A (UP) button to select the cities.
3. Use the ࠗ
B (SET) button to select either SET
(display the time) or OFF (do not display the time).
4. Use the ࠗ
C (SET) button to select daylight-saving
time ON or OFF.
5. Push the ࠗ
M (MODE) button to its normal position.
Zone setting is now completed.
6. Press the ࠗ
M (MODE) button to return the mode
hand to [TME].
Adjusting the Time
This page should be read with the watch diagram, on
the first page of this manual, showing the location of
the parts.
Adjusting the time for one of the 30 cities will
automatically adjust the time for the remaining
cities according to the time differences.
[Preparation for time adjustment]
1. Press the ࠗ
M (MODE) button to move the
mode hand to [TIME].
2. Press either the ࠗ
A (UP) or ࠗC (DOWN)
button to move to the desired city.
The name of the city will
be displayed at [6].