Filter
Top Products
MSC-2Dx
21
S/S
S/S
Memory Record On/Off
Starting Memory Record
Check that the icon is on in the middle display (memory record feature is in stand-
by state). Push S/S button and data of heart rate, speed, etc., is recording to memory.
If the Auto Time feature is on (
icon is on), the memory record measurement
automatically starts when the bicycle starts.
NOTE !: You can use lap feature only with the memory record reviewing.
Turning off Memory Record
To turn off memory record of the activity, holding down the S/S button for more than
2 seconds.
icon disappears.
NOTE !: When the Auto Time feature is on ( icon is on), Memory Record
does not turn off even when your bicycle stops. You must manu-
ally turn it off by holding down S/S button for more than 2 seconds.
• You can also turn off the memory record features by resetting the computer. But in
this case, note that the general data is erased but the memory record data is
stored in the file you selected.
NOTE !:
Memory Record does not turn off unless you manually turn it off. See if Memory
Record is on or off by noting if the
icon is visible. Only when the memory exceeds
its capacity Memory Record is automatically turned off.
Memory Record
Measurement
Memory Record
Feature is stand-by
Memorizing of data
measured at
selected interval
(timing)
Complete of
memory record
measurement
Memory Record Measurement is
released and mark disappears.
S/S
MODE
S/S
+
Canceling Memory Record
(Turning off icon before timing starts)
To turn off Memory Record when the MSC-2Dx is in a stand-by state (
icon is on
but the Elapsed Time TM has not started):
Hold down S/S button for more than 2 seconds, or
Reset the unit.
The
icon disappears and Memory Record is cancelled.