Filter
Top Products
Operation Guide 5266
E-6
E-45 Using the Countdown Timer
E-45 To enter the Countdown Timer Mode
E-45 To specify the countdown start time
E-46 To perform a countdown timer operation
E-46 To stop the alarm
E-47 Illumination
E-47 To turn on illumination
E-47 To change the illumination duration
E-49 Button Operation Tone
E-49 To turn the button operation tone on and off
E-50 Troubleshooting
E-53 Specifi cations
E-7
Mode Reference Guide
Your watch has 9 “modes”. The mode you should select depends on what you want to do.
To do this: Enter this mode: See:
• View the current time and date in the Home City
• Confi gure Home City and daylight saving time (DST) settings
• Confi gure current location latitude and longitude settings
• Confi gure time and date settings
• Specify the Hijri calendar offset
Timekeeping Mode E-11
• View the Qibla
• Take direction readings and display one of 16 direction
indicators and the angle relative to magnetic north
Qibla Mode E-20
View today’s prayer name and prayer times Today’s Salat Time Screen E-28
View the prayer name and prayer times for a specifi ed date SALAT Time Search Mode E-28
Determine a Moon age value Moon Age Mode E-36
Determine the temperature at your current location Thermometer Mode E-37
Set an alarm time Alarm Mode E-41
Use the stopwatch to measure elapsed time Stopwatch Mode E-44
Use the countdown timer
Countdown Timer Mode
E-45
E-8
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between modes.
• To return to the Timekeeping Mode from any other mode, hold down
C
for about two seconds.
• In any mode, press
L
to illuminate the display.
Moon Age Mode
Thermometer Mode
Stopwatch ModeAlarm Mode
E-9
SALAT Time Search Mode Timekeeping Mode Qibla Mode
Today’s Salat
Time Screen
Countdown Timer Mode
• You also can take digital compass readings in the Qibla Mode (page E-22).
E-10
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Auto Return Features
• If you do not perform any button operation for two or three minutes in the Salat Search Mode,
Moon Age Mode, or Alarm Mode, the watch will automatically return to the Timekeeping Mode.
• If you do not perform any button operation for one or two minutes in the Thermometer Mode or
Qibla Mode, the watch will automatically return to the Timekeeping Mode.
• If you leave a screen with fl ashing digits on the digital display for two or three minutes without
performing any operation, the watch exits the setting screen automatically.
Initial Screens
When you enter the Alarm Mode, the data you were viewing when you last exited the mode
appears fi rst.
Scrolling
The
B
and
D
buttons are used on the setting screen to scroll through data on the digital display.
In most cases, holding down these buttons during a scroll operation scrolls through the data at high
speed.
E-11
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Each press of
A
in the Timekeeping Mode cycles the digital display between the current
Gregorian calendar date, the current Hijri calendar date, and the current time.
• The HIJRI indicator on the digital display indicates that the Hijri calendar date is displayed.
Day of week
Day Month Day Month
Hour : Minutes
Seconds
Date screen (Gregorian) Date screen (Hijri) Regular timekeeping
screen
HIJRI indicator