Filter
Top Products
Operation Guide 5012 (OC)
7
4.
When everything is the way you want, press the
AA
AA
A
button.
• This will apply your settings and return to normal timekeeping.
The second hand will move to and start timekeeping from the
appropriate seconds count in accordance with the watch’s
internal timekeeping.
■ To adjust the current time and date
setting manually
1.
In the Timekeeping Mode,
keep the
AA
AA
A button
depressed (for about five
seconds) as the indicator
hand goes through the
following sequence.
• The indicator hand will move
to the last signal reception
result (“Y” or “N”), then to
“READY” (or “R” for some
models), and then the city
code of the currently selected
Home City. Next, the second
hand will move to “0” (“60” for
some models).
• The watch will return to normal timekeeping automatically if
you do not perform any operation for about two or three
minutes. Any changes you have made to settings up to that
point will be saved.
2.
Press the
CC
CC
C button.
• The indicator hand will move
to 12 o’clock, and the day of
the week hand will move to
“0” (“60” for some models).
3.
Use the
DD
DD
D (+) and
BB
BB
B (–)
buttons to change the
time setting in one-minute
increments.
• Holding down either button
will cause the hands to move
at high speed. Once started,
high-speed hand movement
will continue even if you
release the button. To stop
high-speed hand movement,
press any button.
• Check the 24-hour hand to make sure that the time is set
properly (1:00 a.m. = 1 o’clock, 1:00 p.m. = 13 o’clock).
4.
Press
CC
CC
C to change to the
year setting.
5.
Use the
DD
DD
D button to move
the units digit (indicator)
hand clockwise and the
BB
BB
B
button to move the tens
digit clockwise.
• Use the D button to move
the indicator hand clockwise.
20X0
20X5
20X9
20X8
20X7
20X6
20X1
20X2
20X3
20X4
• Use the B button to move the tens digit (indicator) hand
clockwise.
200X
206X
201X
202X
208X
207X
205X
204X
209X 203X
6.
Press
CC
CC
C to change to the
month setting.
7.
Press the
DD
DD
D button to
move the indicator hand
clockwise one month.
Dec
Jun
Jan
Feb
Nov
Aug
Oct
Jul May
Apr
Sep Mar
8.
Press
CC
CC
C to change to the
day setting.
9.
Use the
DD
DD
D (+) and
BB
BB
B (–)
buttons to change the day
setting in one-day
increments.
10.
When everything is the
way you want, press the
AA
AA
A button.
• This will exit the setting
procedure and reset the
seconds count to zero.
• Press A to restart
timekeeping on a time signal
on the TV or radio.
• The day of the week is
calculated automatically.
In areas where date data can be received with the calibration
signal, the watch will adjust automatically for leap years and
months of different lengths. In areas where reception of a time
calibration is not possible you will need to adjust the date
manually for leap years and months of different length.
30
Second hand
Indicator hand
30
30
(–)
24-hour hand
(+)
30
Tens digit (indicator) hand
Units di
g
it hand
30
30
Moves to the
current month settin
g
.
30
30
30
(–)
(+)
Day
30