Filter
Top Products
Operation Guide 5262
E-39
Change the Home City and daylight saving time (DST) settings, if you want.2.
For details about these settings, see steps 2 and 3 under “To confi gure Home x
City settings” (page E-33).
In the following steps, each press of
x C cycles between settings as shown
below.
Home city/DST Hour/Minute
Year
(tens digit)
Day Month
Year
(ones digit)
C
C
C
C
C
C
E-38
Confi guring Current Time and Date Settings Manually
You can confi gure current time and date settings manually when the watch is unable
to receive a time calibration signal.
To change the current time setting manually
In the Timekeeping Mode, keep 1. A depressed (for about
fi ve seconds) as the
x
Second Hand goes through the
following sequence.
Moves to
x YES (or Y for some models) or NO (N)
to indicate the last signal reception result, then to
READY (R), and then to the city code of the currently
selected Home City.
At this time, the
x
v
Left Dial Hand will indicate the
Home City’s current daylight saving time setting (STD
or DST).
@>
E-37
Note
After you specify a city code, the watch will use UTC* offsets in the World Time
x
Mode to calculate the current time for other time zones based on the current time
in your Home City.
Selecting some city codes makes it possible for the watch to receive the time
x
calibration signal for the corresponding area automatically. See page E-17 for
details.
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. *
The reference point for UTC is Greenwich, England.
E-36
To toggle the Home City time between standard time and daylight saving time
Perform the step 1 under “To confi gure Home City settings” on page E-33.1.
Each time you select a city code, the
x
z
Hour Hand,
c
Minute Hand, and
b
24-hour Hand move to the current time for that city code. Do not perform the
next operation until these hands stop moving.
Press 2. B to toggle the time for the city code of the currently selected Home City
between STD (standard time)/DST (daylight saving time).
In the city code setting mode, the
x
v
Left Dial Hand indicates the current daylight
saving time setting as STD (standard time) or DST (daylight saving time).
Note that you cannot switch between
x STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After the setting is the way you want, press 3. A to return to the Timekeeping Mode.
E-35
Press 3. B to toggle the time for the currently selected city code between STD
(standard time)/DST (daylight saving time).
x In the city code setting mode, the
v
Left Dial Hand indicates the current daylight
saving time setting as STD (standard time) or DST (daylight saving time).
Note that you cannot switch between
x STD (standard time)/DST (daylight saving
time) while UTC is selected as your Home City.
After all the settings are the way you want, press 4. A to return to the Timekeeping
Mode.
E-34
The watch will exit the setting mode automatically if you do not perform any x
operation for about two or three minutes.
For details about city codes, see the “City Code Table” at the back of this
x
manual.
To change the Home City setting, press 2. D to move the
x
Second Hand clockwise.
Keep pressing
x D until the
x
Second Hand is pointing
at the city code you want to select as your Home City.
Each time you select a city code, the
x
z
Hour Hand,
c
Minute Hand,
b
24-hour Hand and
m
Day
Indicator move to the current time and date for that
city code. Do not perform the next operation until
these hands stop moving.
B +
*> 5@
E-33
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting
either standard time or daylight saving time (DST).
To confi gure Home City settings
Note
This watch does not have a city code that
x
corresponds to Newfoundland.
In the Timekeeping Mode, keep 1. A depressed (for about
fi ve seconds) as the
x
Second Hand goes through the
following sequence.
Moves to
x YES (or Y for some models) or NO (N)
to indicate the last signal reception result, then to
READY (R), and then to the city code of the currently
selected Home City.
This indicates the city code setting mode.
x
@
E-32
Timekeeping
Use the Timekeeping Mode to view the current time and date. To enter the
Timekeeping Mode from any other mode, hold down C at least two seconds.
Hand Functions
z
Hour Hand
x
Second Hand
c
Minute Hand
v
Left Dial Hand: Indicates the day of the week.
b
24-hour Hand:
Indicates the current 24-hour timekeeping hour. The long
end indicates the current hour between 18:00 and 6:00.
The short end indicates the current hour between 6:00
and 18:00.
n
Right Dial Hands:
Indicate the current time in the World Time City (page
E-51) in 24-hour format.
m
Day Indicator
B +
* 6> 5
@
E-31
To select a mode
Press C to cycle between the modes as shown below. The
v
Left Dial Hand
indicates the currently selected mode.
>
The hand indicates the day
of the week (SU, MO, TU,
WE, TH, FR, SA).
The hand points to ALM.
Timekeeping Mode Stopwatch Mode
The hand points to 0.
C
CC
C
World Time Mode
The hand points to STD
or DST.
Alarm Mode
E-30
Selecting a Mode
With this watch, everything starts from the Timekeeping Mode.
To determine the watch’s current mode
Check the position of the
v
Left Dial Hand as shown
under “To select a mode” (page E-31).
To return to the Timekeeping Mode from any other
mode
Hold down C for about two seconds until the
x
Second
Hand returns to 12 o’clock.
>