Filter
Top Products
Operation Guide 3311/3356
9
2. If the second hand does
not align properly with the
12 o’clock position, press
the
DD
DD
D button to adjust it.
• Each press of the D button
advances the second hand
one second.
• Holding down the D button
advances the second hand at
high speed.
3.
Press the
CC
CC
C button.
• This will cause the hour and
minute setting of the digital
time to flash on the display.
4. Use the
DD
DD
D (+) and
BB
BB
B (–)
buttons to adjust the hour
and minute hands.
• Each press of the D button
moves the hands 20 seconds
clockwise, while the B button
moves them 20 seconds
counterclockwise.
• Holding down either button
moves the hands at high
speed.
High-speed Lock
• While holding down the D button to start high-speed clockwise
movement of the hands, press the B button to lock the
high-speed hand movement. You can then release the buttons.
• While holding down the B button to start high-speed
counterclockwise movement of the hands, press the D button to
lock the high-speed movement. You can then release the buttons.
• High-speed hand movement will continue until it completes a
12-hour cycle, or until you press any button to stop it.
5. When the setting is the
way you want, press the
AA
AA
A button.
• This exits the setting screen
and automatically
synchronizes the minute hand
with the current seconds
count.
• At this time, the second hand
will adjust automatically to the
digital time.
• The display also will exit the
setting screen automatically if
you do not perform any
operation for about two or
three minutes.
Digital-Analog Synchronization
After adjustment of the digital time, the watch automatically
adjusts its analog setting to match.
• When adjusting the analog time, the hands may move clockwise
or counterclockwise.
• Depending on how many hours different the digital and analog
time settings are, it may take some time for the analog hand
setting procedure to be finished.
• After adjustment of the hour and minute hand, the second hand
will adjust automatically to the digital time.
Ajusting the Analog Time Setting
You can use the Hand Setting Mode to manually adjust the analog
time when it does not match the digital time.
Mode Indicator
(5 times)
Timekeeping Mode Hand Setting Mode
1. In the Hand Setting Mode,
hold down the
AA
AA
A button
for about two seconds.
• This will cause the second
hand to move to 12 o’clock,
and “–00–” to flash on the
digital display.
(
Forward
)
(Selects Settin
g
)
(
Forward
)
(Back)
Hand Setting Mode