Casio 2984 Watch User Manual


  Open as PDF
of 6
 
6
Operation Guide 2984
Using Dual Time
Current Time
PM Indicator
(no display for AM)
Minute
Hour Seconds
The Dual Time Mode lets you set a second time (in 30 minute steps), so you can keep track
of the current time in another time zone, etc.
• The Dual Time Mode seconds count is synchronized with the Timekeeping Mode seconds
count.
• The same 12-hour/24-hour format you select for the Timekeeping Mode time is also used by
the Dual Time Mode.
• In the Timekeeping Mode, press the C button five times to enter the Dual Time Mode.
❚
To configure Dual Time settings
In the Dual Time Mode, press the
DD
DD
D (+) button or
AA
AA
A
(–) button to change the time setting in 30-minute
steps.
• Holding down either button changes the setting at high
speed.
• Pressing the B button changes the Dual Time Mode time
to the Timekeeping Mode time.
Resetting the Seconds Count to Zero
Resetting the zero count to zero on an accurate time signal about once a month helps to
ensure accurate timekeeping.
1. In the Timekeeping Mode, hold down the
BB
BB
B button
for about one second until the seconds start to
flash.
2. In accordance with a time signal on the TV or
radio, press the
DD
DD
D button.
This resets the seconds to 00.
Pressing the D button while the seconds count is in the range of 30 to 59 resets it to 00
and also adds 1 to the minutes. Pressing the D button in the range of 00 to 29 resets
the seconds count without changing the minutes.
• In Japan, you can obtain the current time by dialing 117 on the telephone.
Seconds
3. After resetting the seconds, press the
BB
BB
B button to
exit the setting screen.
• The watch automatically exits the setting screen if you do not perform any operation for
about two or three minutes.
Configuring Time and Date Settings
Use the following procedure to set the current time and date after having the watch’s
battery replaced, etc.
1. In the Timekeeping Mode, hold down the
BB
BB
B button
for about one second until the seconds start to
flash.
2. Use the
CC
CC
C button to move the flashing to the
setting you want to change.
Each press of C moves the flashing around the display in
the sequence shown below.
MinuteSeconds
Day Month Year
12/24-hour
Timekeeping
Hour
• You can set the year within the range of 2000 to 2039.
• The day of the week is set automatically in accordance with the date you set.
Seconds
Month, Day
Year
Hour Minute
3. Use the
DD
DD
D (+) and
AA
AA
A (–) buttons to select the
setting you want to change.
• Holding down either button changes the setting at high
speed.
Use the C button to select each of the settings and the D and A buttons to change
them.
• When setting the hour, make sure you specify AM (no indicator) or PM (PM) correctly
if you are using 12-hour timekeeping, or that you specify the correct 24-hour time.
• When the 12/24-hour timekeeping setting is selected, press D to toggle between 12-
hour and 24-hour timekeeping.
4. After all the settings are the way you want, press the
BB
BB
B button to exit the setting
screen.
• The watch makes adjustments for leap years and month lengths automatically.
(Decrease)
(Increase)
 previous