Filter
Top Products
1868-3
[Average Temperature
Display]
Average Temperature
Month
D
A
B
C
C
WORLD TIME MODE
The World Time Mode shows you the
current time and average temperatures
in 27 cities (29 time zones) around the
world.
• For full information on city codes, see
the “CITY CODE TABLE”.
• The time settings of the Timekeeping
Mode and the World Time Mode are
independent from each other, so you
must make separate settings for each.
• Whenever you change the time setting
for any city in the World Time Mode,
the settings of all other cities are
changed accordingly.
Selecting a World Time City and Viewing Its Time and
Temperature Information
1. In the World Time Mode, press C to scroll
forward through the city codes (time zones)
and B to scroll back.
• When you display the screen of a city, its
time and GMT differential appear first. Next,
the GMT differential display changes to the
current Timekeeping Mode time.
2. Press A to display the average temperature
in the displayed city for the currently selected
month.
3. Press C to scroll forward through the months and B to scroll back.
• No average temperature data is shown when
GMT or --- is
indicated as the city.
• Press A to return to the current time screen for the selected city.
D
A
N
N
E
E
S
E
S
S
W
W
N
W
B
C
P
P
C
P
GMT
GMT differential
Mode
indicator
City Code
Timekeeping Mode time
Time in indicated city
Setting the World Time
1. In the World Time Mode, use B and C to
scroll through the city codes and find the one
you want.
2. Hold down A until the DST On/Off setting
starts to flash on the display.
• The DST On/Off setting is flashing because
it is
selected
.
3. Press D to move the flashing in the
sequence shown below to select other
settings.
• While DST setting is selected (flashing), press C to toggle Daylight
Saving Time on (
DST) and off (OFF).
• While hour or minutes is selected (flashing), press C to increase the
setting or B to decrease it.
4. After you set the time, press A to return to the World Time screen.
Daylight Saving Time (DST)
Daylight Saving Time automatically advances the time setting by one hour
from Standard Time. You can make individual Daylight Saving Time settings
for each city code (time zone). Remember that not all countries or even
local areas use Daylight Saving Time.
To switch between Standard Time and Daylight Saving Time
1. In the World Time Mode, use B and C to display the city code (time
zone) whose standard time/daylight saving time setting you want to
change.
2. Hold down A until the DST On/Off setting starts to flash on the display.
3. Press C to toggle between Daylight Saving Time (
DST) and Standard
Time (OFF).
4. After you are finished making the setting you want, press A to return to
the World Time screen.
• The DST indicator is on the display whenever you display a city code
for which daylight saving time is turned on.
D
A
B
C
DST
P
GMT
DST indicator
MinutesDST on/off Hour
ALARM MODE
You can use the Alarm Mode to set three
independent alarms with hour, minutes, month,
and day. You can also turn on an Hourly Time
Signal that causes the watch to beep twice every
hour on the hour.
D
A
B
C
A
Alarm No.
Alarm on
indicator
AM indicator
Hour : Minutes
Month – Day
Alarm 1
Hourly Time Signal
Alarm 2 Alarm 3
D
A
B
C
A
Alarm Types
The alarm type is determined by the settings you make, as described below.
• Daily alarm
Set the hour and minutes for the alarm time. Set x for the month and xx
for the day (see step 4 under “Setting Alarms”). This type of setting causes
the alarm to sound everyday at the time you set.
• Date alarm
Set the month, day, hour and minutes for the alarm time. This type of setting
causes the alarm to sound at the specific time, on the specific date you set.
• 1-Month alarm
Set the month, hour and minutes for the alarm time. Set xx for the day
(see step 4 under “Setting Alarms”). This type of setting causes the alarm
to sound everyday at the time you set, only during the month you set.
• Monthly alarm
Set the day, hour and minutes for the alarm time. Set x for the month (see
step 4 under “Setting Alarms”). This type of setting causes the alarm to
sound every month at the time you set, on the day you set.
Setting Alarms
1. Press C while in the Alarm Mode to select the alarm whose time you
want to set.
2. After you select an alarm, hold down A until
the hour digits of the alarm time start to flash
on the display.
• The hour digits are flashing because they
are
selected
.
• This operation automatically turns on the
alarm.
3. Press D to move the flashing in the
sequence shown below to select other digits.
4. While hour, minutes, month, or day is selected (flashing), press C to
increase the setting or B to decrease it.
• To set an alarm that does not include a month (Daily alarm, Monthly
alarm), set
x for the month. Press B or C until the x mark appears
(between 12 and 1) while the month setting is flashing.
• To set an alarm that does not include day (Daily alarm, 1-Month alarm),
set xx for the day. Press B or C until the xx mark appears (between
31 and 1) while the day setting is are flashing.
• When setting the alarm time using the 12-hour format, take care to
set the time correctly as morning (A indicator) or afternoon (P indicator).
5. After the alarm time is the way you want it, press A to return to the
alarm display screen.
Alarm Operation
The alarm sounds at the preset time for about 20 seconds, or until you
stop it by pressing any button.
To test the alarm
Hold down C to sound the alarm.
Turning an Alarm and Hourly Time Signal On and Off
1. In the Alarm Mode, press C to select an alarm or the Hourly Time
Signal.
2. When the alarm or Hourly Time Signal you want to is selected, press A
to turn it on and off.
Indicates alarm is ON.
Indicates Hourly Time Signal is ON.
• The alarm on indicator ( ) and the Hourly Time Signal on indicator
( ) are shown on the display in all modes while these functions are
turned on.
• If any alarm is on, the Alarm On Indicator is shown on the display
when you change to another mode.
Hour Day
Minutes Month