Filter
Top Products
12
Using the Viewer With A Computer (Card Reader Function)
The USB port next to the card slots on the left side of the Viewer allows it to function as an SD “card
reader” when connected with the included USB cable to any computer (Windows 2000, ME, XP or
Vista (Windows 98/98SE Is not supported); Mac OS 9 or OS X). The connected Viewer will operate
just like an external hard drive, from which your photos may be accessed for viewing, editing and/or
storing on your computer.
Transferring Photos to Your PC - Step by Step
1. Make sure the Viewer power is on rst, then connect the supplied cable to the Viewer’s USB port
(open the door on the left side of the Viewer), then directly to a main USB port on your computer-do
not use front panel/keyboard USB ports or unpowered “hubs”.
2. The LCD display will indicate that the Viewer has been recognized as a standard “Mass Storage”
device. This means that the camera les can be easily viewed, edited, or copied to your hard drive,
just as if they were stored on an external hard drive or CD-ROM. (Mac users: the Viewer will be seen
as a new drive icon on your desktop.) Note: if you connect the Viewer to your PC rst, then turn
its power on, the Viewer may be incorrectly identied by your computer as a new or unknown “PC
Camera” (webcam). If so, simply click “Cancel” on your PC, disconnect the Viewer and try it again,
this time powering on the Viewer before connecting the USB cable. If the Viewer “locks up” or does
not respond, slide open the battery compartment door and temporarily pull one of the batteries out,
re-insert it and try again.