Filter
Top Products
11
Menu Item
Settings
(Bold=default)
Description/Operation
Date Year, month,
and day
Press Ok and use the Up/Down
buttons (to change the setting),
then press Ok again to go to the
next date parameter and repeat,
to set the current year, month,
and day. Press Ok after setting
the day to move on and set the
Time (next item)
Time Hour and
minute
Press Ok and use the Up/
Down buttons (to change the
setting) then Ok again ( to move
to the next eld) to set the
current hour (24-hr format only,
“00”=midnight, “12”=noon) and
minute.
Delay Minutes (0-10)
or seconds
(0-59)
Default delay
time= 10 sec.
Selects the length of time that
the camera will “wait” until it
responds to any additional
triggers from the PIR after an
animal is rst detected and
remains within the sensor’s
range. During this user set
“ignore triggers” interval, the
camera will not capture photos/
videos. This prevents the card
from lling up with too many
redundant images. Settings
begin with 10 second default
time. Press Ok, set the delay time
in minutes (if desired), press Ok
and set the delay in seconds.
SETUP MENU: Items/Settings/Description