Filter
Top Products
13
Step 5 Install Stabilizers and Lower Lat Connector
Parts:
• Right and Left Stabilizer (Box 3)
• Lower Seat Connector (Box 4)
Tools:
• 5/16” Allen Wrench
• 3/4” Wrench or Adjustable Wrench
5-1 Insert Lower Seat Connector into the Main Frame with the
threaded hole on the flat side pointing down as shown.
5-2 Align the Right and Left Stabilizers with the holes in the Main frame.
5-3 Install but DO NOT TIGHTEN the hardware.
NOTE: You will install an additional screw in the Lower Seat Connector when the unit is upright.
Main Frame
Right Stabilizer
Hardware (1:1):
1 Button Head Cap Screw (1/2” X 4 1/2 ”)
6 Washer (1/2”)
1/2”x 1” Allen Bolt
1/2” Washer
Assembly (Unboxing)
1/2” x 4 1/2” Allen Bolt
1/2” Nylock Nut
1 Nylock Nut (1/2”)
Left Stabilizer
Lower Seat Connector
4 Button Head Cap Screw With Threadlock (1/2” X 1”)
Make sure threaded
hole is pointing down.