Filter
Top Products
18
Assembly is complete! Please take the following steps before using the gym:
1.
2.
3.
4.
5.
6.
7.
Make certain all bolts are tightened securely.
Make certain all cables are seated into all pulley grooves. A cable rubbing
against steel will peel the nylon coating, voiding warranty and resulting in
a need for replacement.
Pre-stretch the cables. Put the Weight Selector Pin(42) in the bottom hole on the
weight stack. Pull on the cables with great force, helping remove any kinks and
providing any initial cable stretch.
Be aware the cables can loosen and slightly stretch upon initial use.
The cables should be adjusted as tight as possible, but no so tight as to lift the
Top Plate(8) above the weight stack. Be certain to secure the jam nuts after
adjustments are made.
For better performance, apply a household lubricant (such as silicone) to
any adjustable areas and to the Guide Rods(5).
Enjoy many years of a Fit Lifestyle.
Thank you for purchasing the Bodycraft Galena Home Gym. If You
have any questions, please call your local BodyCraft dealer or call
our customer service department at 800-990-5556.