Filter
Top Products
INSPEC TION AND MAINTENANCE
GREASING PROCEDURES TO THE DRIVING CHAIN
1. Shut o the engine
2. Add light amounts of machine oil or chain grease to the driving chain. (Too much machine
oil or chain grease may cause splattering to occur.)
Attention:
The chain should be replaced when the adjusting limit has reached it’s maximum.
17
ADJUSTMENT OF CHAIN
1. When chain adjustment is needed, loosen 4 bolts under engine.
2. Move engine forward to tighten chain or backward to loosen chain.
3. Tighten bolts under engine Torque bolts to 25 ft./lbs.
4. Repetitively check tension of chain.
19-25mm
3/4 in. - 1 in.
INSPEC TION AND MAINTENANCE
MINOR CHAIN ADJUSTMENT
1. When minor chain adjustment is needed, loosen
“Nut 2”. Turn “Nut 1” clockwise to tighten chain or
counterclockwise to loosen chain.
2. When adjustment is accomplished, tighten Nut 2.
Engine adjusting bolts
Loosen
Chain
Nut 1
Nut 2
Loosen
Chain
Tighten
Chain