Filter
Top Products
1.
Ensure there is fuel in fuel tank and oil in
crank case.
2.
Set fuel valve lever to “ON” position
3.
Place choke lever in “ON” position
4.
Start engine with pull start cord.
5. Allow engine to idle until engine is warm
6.
Move carburetor choke lever toward “OFF” position when engine has suciently warmed
up. Note: Engine may run ideally with choke lever placed between “ON” position and
“OFF” Position.
Procedures for stopping engine:
1.
Release throttle twist grip to slow down engine.
2.
Depress stop button located on right hand grip. Depress button until engine
comes to a complete stop
3.
Set fuel valve lever (the fuel tank valve) handle to “OFF” position.
CAUTION
Unnecessarily increasing RPM’s to a high level while the Mini Bike is warming up is
harmful to the engine.
CAUTION
Verify fuel and oil level prior to starting (see page 12)
Starting the engine with low or no oil will damage the engine.
WARNING
Never start the engine in a closed place as the exhausted gas from the vehicle contains
toxic carbon monoxide.
11
Fuel valve lever
ON
Choke Lever
OFF ON
OFF
ENGINE STARTING AND STOPPING